HP0-262 Q&A / Study Guide / Testing Engine / Videos

Best HP Certification Training and HP Exams Training
and more HP exams log in to Certkingdom.com

---

QUESTION 1
What type of ink is used in the DesignJet 500/800 series printers?

A. 3 color print heads (pigmented) and one black print head (dye)
B. 3 color print heads (dye) and one black print head (pigmented)
C. 4 print heads (dye)
D. 4 print heads (pigmented)

Answer: B

---

QUESTION 2
On the DesignJet 5X00, how do you access the submenu Service Test Menu for onsite support?

A. boot up with the Up arrow and the Enter keys held down
B. go to Printer Setup>Utilities and press the Up arrow and Enter
C. go to Printer Setup>Device Setup and press the Up arrow and Enter
D. go to Printer Setup>Calibrations

Answer: B

---

QUESTION 3
Where is the spittoon assembly located on the 7XX series Large Format Printer?

A. there are two, at both sides of the unit
B. under the right end cover
C. there is no spittoon
D. below the Service Station under the left end cover

Answer: B

---

QUESTION 4
What should you do when repackaging or moving a DesignJet 5X00 printer?

A. unload the media, remove the tube assembly and ink supply, and power off using the front switch
B. unload the media
C. unload the media, choose Park HDD in Device Setup, and power off using the rear switch
D. unload the media and remove ink supplies

Answer: B

---

QUESTION 5
On a DesignJet 1000 series printer, the print head status 'monitor' appears in the display. What
does this indicate?

A. one of the print heads is not seated correctly
B. the print head must be replaced
C. an excessive number of nozzles have failed
D. the print head has reached the end of its expected life

Answer: D

---

Best HP Certification Training and HP Exams Training
and more HP exams log in to Certkingdom.com

HP0-238 Q&A / Study Guide / Testing Engine

Best HP Certification Training and HP Exams Training
and more HP exams log in to Certkingdom.com

---

QUESTION 1
Using the MSA1000 Software Support CD, which installation options do you have? Select TWO.

A. new firmware
B. Windows drivers
C. MSAFlash utility
D. Secure Path
E. ACU-XE

Answer: B,E

---

QUESTION 2
You have a configuration with 3 virtual disks configured in one array. One virtual disk is RAID 0,
one is RAID 5 and one is ADG. Identify the correct statements if one hard drive has failed and you
remove a wrong (running) drive from this array. Select TWO.

A. RAID 5 has data loss when you remove the wrong drive.
B. RAID 5 has data loss after first drive failure.
C. ADG is still online.
D. RAID 5 is still online.
E. ADG has data loss when you remove the wrong drive.

Answer: A,C

---

QUESTION 3
Click the Exhibit button.
On an MSA1000 disk, all LEDs are OFF. What are possible causes for the status and which
actions should you take? Select TWO.


A. The array is performing an online expansion. Do not remove this drive without verifying the
configuration.
B. The drive is not configured as part of an array. You can remove the drive.
C. The array is rebuilding. Do not remove this drive without verifying the configuration.
D. The drive is configured as a hot spare. If needed, you can remove the drive.
E. The drive is part of the selection of the array configuration utility. Do not remove this drive
without verifying the configuration.

Answer: B,D

---

QUESTION 4
Which cable can be used to connect an MSA1000 with I/O-module to a 1 Gb SAN switch?

A. LC to SC
B. SFF to SFP
C. SC to SC
D. LC to LC

Answer: A

---

Best HP Certification Training and HP Exams Training
and more HP exams log in to Certkingdom.com

HP HP0-728 Q & A / Study Guide

Best HP Certification Training and HP Exams Training and more Cisco exams log in to Certkingdom.com

---

QUESTION 1
What is a Continuous Access EVA copy set?

A. a set of DR groups selected for the purpose of managing the groups
B. a group ofVdisks that transition to the same state simultaneously
C. a bound set of twoVdisks used for long distance replication
D. a set of two or more cluster nodes created as part of a stretch cluster

Answer: C

---

QUESTION 2
How should Vdisks for Continuous Access be preferred?

A. split theVdisk in the DR group between the controllers for load balancing
B. allVdisks in the DR group to the same controller
C. split theVdisk in the EVA between the controllers for load balancing
D. allVdisks in the same disk group to the same controller

Answer: B

---

QUESTION 3
The log disk collects host writes for _____.

A. managed sets
B. sourceVdisks
C. entire copy set
D. destinationVdisks

Answer: D

---

QUESTION 4
Which two can be failed over during a Continuous Access EVA planned or unplanned event?
(Choose two.)

A. a single HSV controller
B. copy set
C. managed set
D. DR group

Answer: C,D

---

QUESTION 5
Which two inputs does the Continuous Access EVA Replication Performance Estimator require?
(Choose two.)

A. one-wayintersite latency
B. throughput per second
C. two-wayintersite latency
D. size of a read data packet
E. size of the write data packet
F. number of IO’s per second

Answer: A,E

---

QUESTION 6
A customer has a high availability Continuous Access EVA environment. All DR groups are set to
failsafe mode enabled. The source site array has a hardware failure and all DR groups are failed
over to the destination site. The hardware failure is then fixed.
Which two commands need to be set to restore normal operations at the source site? (Choose
two.)

A. failback
B. suspend
C. failsafe mode enable
D. resume
E. failover

Answer: C,E

---

QUESTION 7
Where is the Business Copy (BC) server component installed in the diagram?

A. Storage Management Appliance (Node 1)
B. storage array
C. host (Node 2)
D. desktop with web browser

Answer: A

---

QUESTION 8
In Continuous Access EVA, which statement is true?

A. Synchronous mode allows for more data loss than asynchronous mode.
B. A copy set’s mode is set to synchronous/asynchronous mode.
C. All copy sets within a DR group are either synchronous or asynchronous.
D. Asynchronous mode means an I/O acknowledgement is sent to the host after data is written to
the sourceVdisk and destination Vdisk.

Answer: C

---

QUESTION 9
You are creating a DR group for a database.
Which disk group is used for the write history log for the database DR group?

A. 3 TB database disk group with 1 TB of free space
B. an empty disk group with 2 TB of space
C. a new disk group will get created for the log disk
D. 5 TB windows disk group with 2 TB of occupied space

Answer: D

---

QUESTION 10
CORRECT TEXT
Which icon denotes a failed-over DR group?

Answer: B

Best HP Certification Training and HP Exams Training and more Cisco exams log in to Certkingdom.com