300-415 Implementing Cisco SD-WAN Solutions Exam

 

Associated certifications:
CCNP Enterprise : Cisco Certified Specialist - Enterprise SD-WAN Implementation

Exam overview
This exam tests your knowledge of Cisco’s SD-WAN solution, including:
SD-WAN architecture
Controller deployment
Edge router deployment
Policies
Security
Quality of service
Multicast
Management and operations

Exam preparation: Official Cisco training

Implementing Cisco SD-WAN Solutions (ENSDWI)

Implementing Cisco SD-WAN Solutions v1.1 (300-415)

Exam Description:
Implementing Cisco SD-WAN Solutions v1.1 (ENSDWI 300-415) is a 90-minute exam associated with the CCNP Enterprise Certification. This exam tests a candidate's knowledge of Cisco’s SD-WAN solution including SD-WAN architecture, controller deployment, WAN Edge router deployment, policies, security, quality of service, multicast, and management and operations. The course, Implementing Cisco SD-WAN Solutions, helps candidates to prepare for this exam.
The following topics are general guidelines for the content likely to be included on the exam. However, other related topics may also appear on any specific delivery of the exam. To better reflect the contents of the exam and for clarity purposes, the guidelines below may change at any time without notice.

20% 1.0 Architecture
1.1 Describe Cisco SD-WAN architecture and components
1.1.a Orchestration plane (vBond, NAT)
1.1.b Management plane (vManage)
1.1.c Control plane (vSmart, OMP)
1.1.d Data plane (WAN Edge)
1.1.d (i) TLOC
1.1.d (ii) IPsec and GRE
1.1.d (iii) vRoute
1.1.d (iv) BFD
1.2 Describe Cisco SD-WAN Edge platforms and capabilities
1.3 Describe Cisco SD-WAN Cloud OnRamp
1.3.a SaaS
1.3.b IaaS
1.3.c Colocation

15% 2.0 Controller Deployment
2.1 Describe controller cloud deployment
2.2 Describe controller on-premises deployment
2.2.a Hosting platform (KVM and Hypervisor)
2.2.b Installing controllers
2.2.c Scalability and redundancy
2.3 Configure certificates and device lists
2.4 Troubleshoot control plane connectivity between controllers

20% 3.0 Router Deployment
3.1 Describe WAN Edge deployment
3.1.a On-boarding
3.1.b Orchestration with zero-touch provisioning and plug-and-play
3.1.c Data center and regional hub deployments
3.2 Configure Cisco SD-WAN data plane
3.2.a Circuit termination and TLOC-extension
3.2.b Dynamic tunnels
3.2.c Underlay-overlay connectivity
3.3 Configure OMP
3.4 Configure TLOCs
3.5 Configure CLI and vManage feature configuration templates
3.5.a VRRP
3.5.b OSPF
3.5.c BGP
3.5.d EIGRP
3.6 Describe multicast support in Cisco SD-WAN

20% 4.0 Policies
4.1 Configure control policies
4.2 Configure data policies
4.3 Configure end-to-end segmentation
4.3.a VPN segmentation
4.3.b Topologies
4.4 Configure Cisco SD-WAN application-aware routing
4.5 Configure direct Internet access

15% 5.0 Security and Quality of Service
5.1 Configure service insertion
5.2 Describe Cisco SD-WAN security features
5.2.a. Application-aware enterprise firewall
5.2.b IPS
5.2.c URL filtering
5.2.d AMP
5.2.e SSL and TLS proxy
5.3 Describe Cloud security integration
5.3.a. DNS security
5.3.b. Secure Internet Gateway (SIG)
5.4 Configure QoS treatment on WAN Edge routers
5.4.a Scheduling
5.4.b Queuing
5.4.c Shaping
5.4.d Policing
5.4.e Marking
5.4.f Per-tunnel and adaptive QoS

10% 6.0 Management and Operations
6.1 Describe authentication, monitoring, and reporting from vManage
6.2 Configure authentication, monitoring, and reporting
6.3 Describe REST API monitoring
6.4 Describe software image management from vManage

QUESTION 1
Which component of the Cisco SD-WAN architecture oversees the control plane of overlay network to establish, adjust, and maintain the connections between the WAN Edge devices that form the Cisco SD-WAN fabric?

A. APIC-EM
B. vSmart
C. vManage
D. vBond

Answer: B

QUESTION 2
Which two hardware platforms support Cisco IOS XE SD-WAN images? (Choose two.)

A. ISR4000 series
B. ISR9300 series
C. vEdge-1000 series
D. ASR9000 series
E. ASR1000 series

Answer: A,E

QUESTION 3
What is a default protocol for control plane connection?

A. HTTPS
B. TLS
C. IPsec
D. DTLS

Answer: D

QUESTION 4
Which component of the Cisco SD-WAN control plane architecture should be located in a public Internet address space and facilitates NAT-traversal?

A. WAN Edge
B. vSmart
C. vBond
D. vManage

Answer: C

Examkingdom Cisco 300-415 Exam pdf, Certkingdom Cisco 300-415 PDF

Best Cisco 300-415 Certification, Cisco 300-415 Training at certkingdom.com

300-620 Implementing Cisco Application Centric Infrastructure (300-620 DCACI) Exam

 

Exam overview
This exam tests your knowledge of Cisco switches in ACI mode including:

ACI Fabric Infrastructure
ACI Packet Forwarding
External Network Connectivity
Integrations
ACI Management
ACI Anywhere

Associated certifications:
CCNP Data Center
Cisco Certified Specialist - Data Center ACI Implementation

Exam preparation: Implementing Cisco Application Centric Infrastructure (DCACI)

Exam Description:
Implementing Cisco Application Centric Infrastructure v1.0 (DCACI 300-620) is a 90-minute exam that is associated with the CCNP Data Center Certification. This exam tests a candidate's knowledge of Cisco switches in ACI mode including configuration, implementation, and management.

The following topics are general guidelines for the content likely to be included on the exam. However, other related topics may also appear on any specific delivery of the exam. To better reflect the contents of the exam and for clarity purposes, the guidelines below may change at any time without notice.

20% 1.0 ACI Fabric Infrastructure
1.1 Describe ACI topology and hardware
1.2 Describe ACI Object Model
1.3 Utilize faults, event record, and audit log
1.4 Describe ACI fabric discovery
1.5 Implement ACI policies
1.5.a access
1.5.b fabric
1.6 Implement ACI logical constructs
1.6.a tenant
1.6.b application profile
1.6.c VRF
1.6.d bridge domain (unicast routing, Layer 2 unknown hardware proxy, ARP flooding)
1.6.e endpoint groups (EPG)
1.6.f contracts (filter, provider, consumer, reverse port filter, VRF enforced)

15% 2.0 ACI Packet Forwarding
2.1 Describe endpoint learning
2.2 Implement bridge domain configuration knob (unicast routing, Layer 2 unknown hardware proxy, ARP flooding)

20% 3.0 External Network Connectivity
3.1 Implement Layer 2 out (STP/MCP basics)
3.2 Implement Layer 3 out (excludes transit routing and VRF route leaking)

15% 4.0 Integrations
4.1 Implement VMware vCenter DVS integration
4.2 Describe resolution immediacy in VMM
4.3 Implement service graph (managed and unmanaged)

20% 5.0 ACI Management
5.1 Implement out-of-band and in-band
5.2 Utilize syslog and snmp services
5.3 Implement configuration backup (snapshot/config import export)
5.4 Implement AAA and RBAC
5.5 Configure an upgrade

10% 6.0 ACI Anywhere
6.1 Describe multipod
6.2 Describe multisite

QUESTION 1
An ACI administrator notices a change in the behavior of the fabric.
Which action must be taken to determine if a human intervention introduced the change?

A. Inspect event records in the APIC UI to see all actions performed by users.
B. Inspect /var/log/audit_messages on the APIC to see a record of all user actions.
C. Inspect audit logs in the APIC UI to see all user events.
D. Inspect the output of show command history in the APIC CLI.

Answer: C

QUESTION 2
An engineer is creating a configuration import policy that must terminate if the imported configuration is
incompatible with the existing system. Which import mode achieves this result?

A. merge
B. atomic
C. best effort
D. replace

Answer: B

QUESTION 3
Which components must be configured for the BGP Route Reflector policy to take effect?

A. spine fabric interface overrides and profiles
B. access policies and profiles
C. pod policy groups and profiles
D. leaf fabric interface overrides and profiles

Answer: A

QUESTION 4
Which type of policy configures the suppression of faults that are generated from a port being down?

A. fault lifecycle assignment
B. event lifecycle assignment
C. fault severity assignment
D. event severity assignment

Answer: C

Examkingdom Cisco 300-620 Exam pdf, Certkingdom Cisco 300-620 PDF

Best Cisco 300-620 Certification, Cisco 300-620 Training at certkingdom.com